|
Hastelloy C-4 C4 UNS N06455 2.4610 Alloy C-4 C4 Forged Forging Rings Rolled Rings Forging Sleeves Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings Parts
型号:
parameters1:
parameters2:
parameters3:
parameters1:
parameters2:
parameters3:
We are professional Hastelloy C-4 C4 UNS N06455 2.4610 Alloy C-4 C4 Forged Forging Rings Rolled Rings Forging Sleeves Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings Parts Pieces Material Products from china
Chemical Composition
C | Mn | P | S | Cr | Mo | Si | Co | Fe | Ni | Cu | Ti | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2.4610 | Min % | 14,00 | 14,00 | balance | |||||||||
Max % | 0,015 | 1,00 | 0,025 | 0,015 | 18,00 | 17,00 | 0,08 | 2,00 | 3,00 | balance | 0,50 | 0,70 | |
(Key to Steel 2010) | |||||||||||||
alloy C-4 N 06455 | Min % | 14,00 | 14,00 | remainder | |||||||||
Max % | 0,015 | 1,00 | 0,040 | 0,030 | 18,00 | 17,00 | 0,08 | 2,00 | 3,00 | remainder | 0,70 | ||
ASTM B 622 |
Physical properties
Property | Value |
---|---|
Density: lb/in.3 | 0,314 |
Hardness: HB | <=320 |
Permeability at 20°C/68°F | <1,01 |
Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
---|---|---|---|---|---|
20 / 68 (93 /200) | 408 / 0,097 (101) | 10,1 (70) (79) | 124 (75) (75) | 211 (30,8) (30,2) | (6.0) |
100 / 212 | 426 | 11,4 | 125 | 207 | 10,9 |
200 /392 (204/400) | 448 (0,107) | 13,2 (92) | 126 ( 76) | 202 (29,3) | 11,9 ( 6.6) |
300 / 572 (316/600) | 465 (0,111) | 15,0 (106) | 127 (76) | 195 (28,3) | 12,5 (7.0) |
500 / 932 (538 / 1000) | 490 (0,118) | 18,4 (133) | 129 (78) | 181 (26,2) | 13,2 (7,4) |
600/1112 (649/ 1200) | 502 (0,121) | 20,5 (149) | 132 (80) | 175 (25) | 13.6 (7,7) |
700 / 1292 (760/ 1400) | 512 (0,124 ) | 22,6 (152) | 135 (82) | 168 (23,7) | 140 (8.0) |
800 / 1432 (871/1600) | 522 | 24,8 | 138 | 158 (22,2) | 15.1 (8.7) |
. | . |
Mechanical properties (20°C / 68°F)
Yield strength (0,2% offset) min,ksi | 40-45 (280-310) | ||
---|---|---|---|
Yield strength ,ksi | 46-49 | ||
Tensile strength min.ksi | 100 (690) | ||
Elongation A 5 (%) | 40 | ||
ISO V Notched impact strength at -196°C/-320.8°F (J/cm2) | >=120 |
Products Search