|
Inconel 617 UNS N06617 2.4663 Alloy 617 NiCr23Co12Mo Forged Forging Steel Round Bars Hollow Bars Shafts Square rectangular rectangle Blocks Discs Disks Plates Flat Bars
型号:
parameters1:
parameters2:
parameters3:
parameters1:
parameters2:
parameters3:
We are professional Inconel 617 UNS N06617 2.4663 Alloy 617 NiCr23Co12Mo Forged Forging Steel Round Bars Hollow Bars Shafts Square rectangular rectangle Blocks Discs Disks Plates Flat Bars from china
Chemical Composition
C | Mn | P | S | Cr | Mo | Si | Co | Fe | Ni | Cu | AL | Ti | B | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2.4663 | Min % | 0,05 | 20,00 | 8,50 | 11,00 | bal. | 0,70 | 0,20 | |||||||
Max % | 0,10 | 0,20 | 0,010 | 0,010 | 23,00 | 10,00 | 0,20 | 14,00 | 2,00 | bal. | 0,50 | 1,40 | 0,60 | 0,006 | |
(Key to Steel 2010) | |||||||||||||||
alloy 617 N 06617 | Min % | 0,05 | 20,00 | 8,00 | 10,00 | 44,50 | 0,80 | ||||||||
Max % | 0,15 | 1,00 | 0,015 | 24,00 | 10,00 | 1,00 | 15,00 | 3,00 | 0,50 | 1,50 | 0,60 | 0,006 | |||
ASTM B167 |
Physical properties
Property | Value |
---|---|
Density: lb/in.3 | 0,303 |
Permeability at 20°C/68°F | --- |
Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
---|---|---|---|---|---|
20 / 68 (93 / 200) | 400 (0104) | 13,4 (101) | 122 (748) | 212 (30) | (6,4) |
200 /392 (204 / 400) | 465 (0,111) | 16,3 (113) | 126 (7579 | 200 (29,0) | 12,6 (7,0) |
400/752 (427 / 800) | 515 (0,124) | 19,3 (137) | 128 (770) | 188 (26,9) | 13,6 (7,6) |
600 /1112 (649 / 1200) | 565 (0,137) | 22,5 (161) | 131 (793) | 173 (24,6) | 14,0 (8,0) |
800 /1472 (871 / 1600) | 615 (0,150) | 25,5 (185) | 134 (808) | 157 (21,9) | 15,4 (8,7) |
900 / 1652 (982 /1800) | 645 (0,1579 | 27,1 (197) | 135 (824) | 149 (29,4) | 15,8 (9,0) |
1000 / 1832 | 665 | 28,7 | 138 | 139 | 16,3 |
Mechanical properties (20°C / 68°F)
Yield strength Rp0,2 (MPa) | >=300 | ||
---|---|---|---|
Yield strength | |||
Tensile strength Rm (N/mm2) | 750 | ||
Elongation A5 (%) | 30-35 | ||
ISO-V notch Impact energy (transvers) (J/cm2) (longitudinal) (J/cm2) | >= 100 <=150 | ||
Remarks |
Products Search