|
Monel K-500 K500 Alloy K500 K-500 UNS N05500 2.4375 NiCu30Al forged forging valve body bodies blocks valve bonnets valve stems spindles rods valve closures valve seat rings valve balls valve parts
型号:
parameters1:
parameters2:
parameters3:
parameters1:
parameters2:
parameters3:
We are professional Monel K-500 K500 Alloy K500 K-500 UNS N05500 2.4375 NiCu30Al forged forging valve body bodies blocks valve bonnets valve stems spindles rods valve closures valve seat rings valve balls valve parts valve components from china
Chemical Composition
C | Mn | S | Si | Al | Co | Fe | Ni (incl.Co max1,0) | Cu | Ti | Ni | P | Cr | Mo | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2.4375 | Min % | 2,20 | 0,50 | 63,00 | 27,00 | 0,30 | |||||||||
Max % | 0,20 | 1,50 | 0,015 | 0,50 | 3,50 | 1,00 | 2,00 | 34,00 | 1,00 | ||||||
(Key to Steel 2010) | |||||||||||||||
alloy K 500 N 05500 | Min % | 2,30 | 2,00 | rest | 0,35 | 63,00 | |||||||||
Max % | 0,25 | 1,50 | 0,010 | 0,50 | 3,15 | rest | 0,85 | 70,00 | |||||||
ASTM B865 |
Physical properties
Property | Value |
---|---|
Density: lb/in.3 | 0,307 |
Hardness: HB | 250 |
Permeability at 20°C/68°F | 1.0015 |
non magnetic | up to -210°F |
Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
---|---|---|---|---|---|
20 / 68 (93 /200) | 420| (0,100) (0,107) | 17,4 / 121 (136) | 61 (372) | 179 / 26 (25,8) | (7,6) |
100 / 212 | 454 | 19,4 | 62 | 13,7 | |
200 / 392 (204 / 400) | 480| (0,114) | 20,9 (156) | 63 (378) | 176 (25,5) | 14,6 (8,1) |
400 / 752 (427 / 800) | 500| (0,120) | 27,8 (198) | 65 (390) | 168 (23,9) | 15,2 (8,5) |
700 / 1292 (760 / 1400) | 567 | (0,141) | 35,7 (262) | 66 (400) | 158 | 16,6 (9,3) |
800 / 1472 ( 871 / 1600 ) | 613 (0,157) | 37,4 (282) | 67 (408) | 17,0 (9,6) | |
900 / 165 | 685 | 41,2 | 68 | 17,5 |
Mechanical properties (20°C / 68°F)
Yield strength min ksi | 115 | ||
---|---|---|---|
Tensile strength ksi | 1100 | ||
Elongation % | 20 | ||
Impact energy ISO-V | |||
(average value of 3 samples) | |||
Remarks |
Products Search